Because of my choice of area was Camden Town which neared kingscross place. So I sketched some landscapes in that area. I used to map some of the maps I had done with them before, and the rough areas had been preliminarily designed. These days I had been developing my ideas, I felt the previous idea was not perfect. I wanted to be able to make a large, fully equipped shopping mall, so after careful thought I decided to give up the three conical shapes that were joined together, mainly in the area of triangular cones and rectangular connections.

I designed a multi-tiered triangular structure based on the shape of the foundation, each layer could be rotated. A triangular pillar next to a hollow was a panoramic view of the floor, the top was the restaurant which could rotate inside. The bottom few layers I wanted to design into a shopping center. I wanted to design this area as a series of things, so I designed a small, multi-storey, triangular rotating building next to a triangular base. On the other side of the river I planed to design a great-angled art center with a full-transparent wooden stand bridge above the river. Taking into account the river was not particularly deep, so it should be transparent, so aesthetically pleasing to the eye.

The last day we ended the conversation, we all had different ideas and all had their own characteristics. At the same time, my ideas also needed to be more clear. The teacher suggested that I thought about how to dispose of the rubbish under the big building I designed, and it was best to be able to reuse the rubbish. After the course, I also thought for a long time. After the preparation, I would continue to study this subject and study how to make the garbage reuse.

22nd Nov.

Today was a very interesting lesson. I learned a lot in group work and found that everyone's ideas were very different, but each idea had its own unique view. Today was the construction of buildings that were glued together with gypsum powder and cloth and then designed in groups. And today was the course about introduction to catenary models and fabrication techniques.

We were going to put the foot of the table upside down and build it up. Finally, we turned it back and let the cloth we set up freely fall into the shape of a building on the table, where people could stay. Unfortunately, we did not successfully drop these constructed cloths, so we finally had to cut the cloths one at a time and reassemble them on the table. Because it was a piece of land, so we changed a lot of ways for collage combinations, and finally chose one of our favorite.

Today's content let me re-examine the building, let me be more fascinated with it. The original building was so fun, there are many different forms to show the concept of architecture. So much so that when the teacher told our team to finish the project today, I was still wondering if today's content did not seem to have anything to do with architecture. But when I understood, I was very surprised.

Perhaps the charm of the building there were many and many, I also had a lot to learn, but I believed my interest in the building would not be reduced, only increasing day by day. I was also very grateful for having met many very interesting people and let me see many ideas that were abstract and made me very satisfied.

Nov. 21st

Team to complete a set up task. This lesson was very interesting. We had to put together several tables and set up on the four feet of the table, using plastic film and gypsum water on a specific piece of paper as a part of building. Unfortunately, because our group was composed of two tables, the upper and the lower sides of the table were joined together so that the cloths were not separated successfully when we turned upside down, so we cut the cloths together to form a single building.

I really liked the shape of the building that we put together in a collage, but there were not many people that could be accommodated inside, so I think this collage could not be used with a practical building.

Always thought that the combination of several buildings was not a good design. The buildings that were remodeled according to their roots were different styles, and so far I had not come up with a good solution for bringing together different styles of buildings, which distressed me.

In today's model making, I had separately produced the triangular pyramidal and cylindrical structures that I envision. Based on the pyramidal and rectangular roots, I used multiple architectural combinations and cascading ideas in that area, and many three-dimensional triangles overlapped in various forms. The three cylinders I intended to continue building on the basis of the idea of using large automatic doors based on the trend of cylindrical installation. The current idea of the three buildings was to grow plants and flowers. I wanted to design an artistic area with a panoramic view that connected these two areas to one another. Due to the trend of the river, I also wanted to build a small curved building with a wooden frame on the basis of a triangular cone.

Although the materials were a bit discarded, I learned how to express my ideas as much as possible with limited materials. Very often, as the model progresses, some of the original ideas were changed as the model progresses. Therefore, some samples before the formal model were very necessary.

Nov. 20th

Today, we had a photoshop workshop. Before I did not come into contact with some of the photoshop. I was not very interested in some computer softwares.I did not know if it was simple or difficult, so I was looking forward to doing it and also scared.

This topic was about intensive cities and the landscape to be built. It was a challenge for me to each of us to choose a region for transformation and development in London. Because I wanted to set up and reform on the original basis, in addition to its beautiful appearance and practicability, how to use the surrounding environment ingeniously and rationally was also a question that needed to be considered. In particular, how to reuse the original residual building also needed thinking.

The first task of this task was to try to use photoshop to combine and change the maps of a region of London, and to make preliminary plans for what you wanted to design. At the same time, we could also take photoshop for some exercises, learn to operate the necessary steps. In the beginning, I felt very unskilled, sometimes I did not find that there was no solution and I could not cut the picture all the time. With some help from teachers and classmates, I got a deeper understanding of photoshop and more interested in it. This time my initial idea was to choose camden town, an area very close to kingscross.

Because there was a lot of abandoned building in that area. There were three conical buildings, these three buildings only had the frame, the others did not. Plants were planted on the bottom of these three frames. I would like to make the above transformation, the completion of the building,l wanted to let it become a specialized planting plants or a shopping mall. At the same time, there was a triangular conical exhaust area not far from the three buildings.

This triangular cone was full of rubbish and the area that had been abandoned. Beside these two areas was the not too clean long river. One of the ideas I had was to transform this area into an art center. So when I was doing photoshop today, I thought of building a building on the river that connected this area.

In my initial planning, I might have split the triangular conical area and the three conical areas in consideration of the overall implementability. Because in order to meet the original foundation of both of them, on the basis of their reconstruction of buildings was completely different styles, separate than the integration might be better.

Nov. 16th

This was a preliminary sample model I had done with this area design. Using scrap material as a model taught me how important it was to clearly articulate my design ideas in a limited amount of space and material.

In order to meet the triangle pyramidal and rectangular combination of the foundation, I modified the building to the main triangle. And in the building's exterior to create streamlined shape of the building connected with the conical shape, and should be the characteristics of the water. I wanted to build this all-encompassing landscape art exhibition center with glass all around, and connected the two separate areas together to form a whole.